MASTERKLAMP cast fittings are a versatile system that eliminates the need for welding, bending or threading. It allows you to quickly erect any variety of pipe frame structures, no matter how complex your design.
The
MASTERKLAMP cast fittngs are hot dipped galvanized in accordance with
ISO 1461 to enhance durability in even the most unforgiving outdoor environments. They can also be powder coated in your choice of colour or specification.
Choose from our range of
MASTERKLAMP Crosses, simply by clicking on the images and links below.
 |
2.01 Two Socket Cross
The two socket cross is designed to give a 90° joint between an upright and the middle rail of any rectangular structure such as guard rails. The upright should pass through the fitting. |
 |
2.02 Three Way Mid Corner
The three way mid corner is designed to give a 90° corner joint for the middle of any rectangular structure such as guard or mid railing. |
 |
2.03 Three Way Top Corner
The three way top corner is designed as a 90° corner joint. Normally used for the top corner of rectangular structures such as guard railings, handrails or tennis courts. |
 |
2.04 Two Socket Cross 30° - 45°
The two socket cross 30° - 45° is designed to give a variable joint between the upright and the middle rail. It can be used at any selected angle between 30° and 45°.
|
 |
2.05 Side Outlet Cross
The side outlet cross is designed to connect the upright with the horizontal tubes in three directions, all at 90° to the upright. The upright passes through the fitting. |
 |
2.06 Four Socket Cross
The four socket cross is designed to connect the upright with the horizontal tubes in four directions, all at 90° to the upright. The upright passes through the fitting. |
 |
2.07 Combination Socket Tee & Cross
The combi socket tee & cross is designed to join horizontal rails to the upright and also provides a socket to create a horizontal joint across the section. |
 |
2.08 Crossover 90°
The crossover 90° is designed to give a 90° crossover joint. Normally used on guard rails and other structures where a continuous horizontal rail is required . |
 |
2.09 Clamp-on Crossover 90°
The clamp-on crossover 90° is designed to give a 90° crossover joint between two pipes. Because of the open-end construction it makes an easy add on fitting for existing structures. |
 |
2.10 Adjustable Swivel Cross (Set)
The adjustable swivel cross is designed to give a variable corner joint. It can be used at any selected angle between 90° and 180° . |
 |
2.11 Two Socket Cross 0°-11°
The two socket cross 0°-11° is designed to give a 90° joint between an upright and the middle rail of any rectangular structure such as guard rails. The upright should pass through the fitting. |
Call us for more information,
click here to be directed to our contact us page
